Radioditty transmit failure p2p4/18/2023 ![]() ![]() If you do not have one you can register at RadioID to get one. Select Basic Parameters from the list on the left and change the values below. Go to File > Open and open the second file config (not the default) you created. Note: Clicking the save button in the menu will Save As, using File > Save will save the current config. I used “stock-config.F136” for the factory default config and “Radioddity-DB25-D-KF0IZW.F136” for my config. Click Save again to create a second file with a different name. Note: The number in your progress bar might be different from the screenshot.Ĭlick Save to save the default config. You’ll hear a beep from the radio and see a “Reading” progress bar. Select the COM port from the Finding the COM port section and click Open.īefore making any changes click the Read button to read the config from the radio. Launch the software and go to Device > Comm (Ctrl+k). It’s a good idea to save your config after each step if you need to roll back changes or the software crashes. Note: Your COM port number might be different than the screenshot below. The programming cable will show as Prolific USB-to-Serial Comm Port if you do not see this device you will need to download and install the driver. Plug the cable into your computer and open Device Manager (Start > Run > devmgmt.msc). This page includes an up to date version of the user manual for anything not covered in this post. You may also need the device driver for programming cable. Scroll down to MOBILE SERIES and select DB25-D. Downloadsĭownload the CPS Programming Software (current version is V3.2) from the Radiooddity Download page. This radio does include a lighter adapter. These connections are also pretty standard so anything you find should work. If you’re using this as a base station (at home) you’ll also need a power supply to power the unit. This radio uses a standard SO-239 connection so most should work. Do not transmit without connecting an antenna. You will need an antenna to use this unit even if you’re using a hotspot sitting next to the unit. Programming cable (included with radio).Short VersionĪdd channel to zone then set contact and RX group for channel. This post contains Amazon affiliate links. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |